Home  | Contact | Catalogue | Requests     | Custom Solution |  News  | Information | On-line Help

  Technical Data For Water Resistant Filtered D-Sub Connectors

Technical Data

 D-Subminiature Standard
9, 15, 25, 37 and 50 positions		 D-Subminiature High Density
15, 26, 44 and 62 positions

Insulators

Polyester GF UL 94 V0

Contacts

Copper alloy

Contact finish

 hard gold plated over nickel, solder area tin plated

Shell

 Brass / Steel tin plated
Dielectric withstanding voltage (DWW) Standard......424 VDC Standard......300 VDC
Working voltage 100 VDC 60 VDC
Depending on isolation coordination ( refer to DIN VDE 0110 / IEC 664-1)
Contact resistance max. 10 mΩ before load according to DIN 41652, Part 2
∆R max. 10 mΩ after load according to DIN 41652, Part 2
Insulation resistance > 1 G Ω
Current Rating 5.0 A      ( 20° C ) 3.0 A      ( 20°C )

 Temperature range working

 - 25 °C to + 105 °C - 25 °C to + 85 °C

Capacitor values

 180 pF ±20% Tolerance
370 pF ±20% Tolerance
830 pF ±20% Tolerance
1300 pF ±20% Tolerance		 180 pF ±20% Tolerance
370 pF ±20% Tolerance
830 pF ±20% Tolerance

Mating/Unmating forces

 		   9-positions <    30 N
15-positions <    50 N
25-positions <    83 N
37-positions <  123 N
50-positions <  167 N 		15-positions <  50 N
26-positions <  84 N
44-positions < 120 N
62-positions < 170 N
 
Quality class / Plating code

A =  Quality class 3 =  50  mating cycles
B =  Quality class 2 = 200 mating cycles
C = Quality class 1 = 500  mating cycles
J = Quality class 1  > 500 mating cycles ( telecom quality )
Degree of protection Requirements according to ICE 529 - IP 67

Back