I_OConnectors_GB

Products

Online-Catalogues

D-SUB Con­nec­tors Standard/ High Density/Combination

CONEC D-SUBminiature con­nec­tors are avail­able in five stan­dard­ized hous­ing sizes with stan­dard pole counts of 9, 15, 25, 37 and 50. In addi­tion to this, CONEC also have a high den­sity series deliv­er­able with pole counts of 15, 26, 44, 62 and 78. The Com­bi­na­tion D-SUB con­nec­tors can be used in a wide vari­ety of appli­ca­tions. Dif­fer­ent com­bi­na­tions of con­tact styles like sig­nal, high power, high volt­age and coax­ial con­tacts, are pos­si­ble within one con­nec­tor. The advan­tage of these con­nec­tors is, by com­bi­na­tion of dif­fer­ent con­tact styles within one con­nec­tor, space and cost sav­ings at the IO inter­face area could be reached. In gen­eral the con­nec­tors are sup­plied with sig­nal con­tacts up to the crimp ver­sion. The high cur­rent, high volt­age and coax­ial con­tacts can be ordered sep­a­rately or they can be fac­tory assem­bled ordered. These con­nec­tors are uti­lized in con­trol, reg­u­la­tion and com­mu­ni­ca­tions tech­nol­ogy. Products

Fil­ter D-SUB Con­nec­tors Standard/ High Density/Combination/Adapter

At increas­ing data trans­fer rates and oper­at­ing fre­quen­cies it becomes increas­ingly impor­tant to safe­guard the func­tion of elec­tri­cal devices and sys­tems in their inter­ac­tive rela­tion­ship so that oper­a­tion can be free of inter­fer­ence. In appli­ca­tions where con­nec­tors pen­e­trate shielded enclo­sures com­monly rep­re­sent a break­down in shield­ing since the connector’s plas­tic iso­lat­ing body pro­vides no shield­ing against any inter­fer­ence sig­nals that may be present. CONEC fil­ter con­nec­tors con­tribute to the pro­tec­tion of EMC zones. The inter­grated fil­ter inside the con­nec­tor saves PCB-space and can be installed into an exist­ing PCB lay­out. To replace an unfil­tered con­nec­tor into fil­tered one is sim­ple and effec­tive. D-SUBminiature con­nec­tors as a stan­dard lay­out, high den­sity, com­bi­na­tion or as adapter pro­vide favourable con­di­tions for equip­ping inter­face appli­ca­tions with dif­fer­ent fil­ter ele­ments. Products


RJ45 Mag­netic Mod­u­lar Jack

The CONEC RJ45 Mag­netic Mod­u­lar Jack offers ideal pro­tec­tion from elec­tro­mag­netic inter­fer­ence and common-mode noise in Eth­er­net appli­ca­tions. The advan­tages are that sus­cep­ti­bil­ity to inter­fer­ence is reduced and space is saved on the printed cir­cuit board through the inte­gra­tion of the com­po­nents into the con­nec­tor. The require­ments of sig­nal trans­mis­sion are spec­i­fied in the IEEE 802.3 Stan­dard. The series is avail­able in sin­gle and multi ports (2–4-6–8) as sol­der and SMT fix­tures. Products

 


D-SUB Hoods and Accessories

The CONEC RJ45 Mag­netic Mod­u­lar Jack offers ideal pro­tec­tion from elec­tro­mag­netic inter­fer­ence and common-mode noise in Eth­er­net appli­ca­tions. The advan­tages are that sus­cep­ti­bil­ity to inter­fer­ence is reduced and space is saved on the printed cir­cuit board through the inte­gra­tion of the com­po­nents into the con­nec­tor. The require­ments of sig­nal trans­mis­sion are spec­i­fied in the IEEE 802.3 Stan­dard. The series is avail­able in sin­gle and multi ports (2–4-6–8) as sol­der and SMT fix­tures. Products


 

 

Con­tact us for your indi­vid­ual solu­tion for i/o connectors.