SAL_Connectors_GB

Products

Online-Catalogues

Cir­cu­lar Con­nec­tors overmoulded

Sen­sor Actor Line Con­nec­tors are used in many appli­ca­tions in the field of automa­tion tech­nol­ogy. The instal­la­tion costs and time spent are dras­ti­cally reduced through the use of con­nec­tors with inte­gral wires. The choice of mate­r­ial and the con­struc­tion of the con­nec­tor enable it to be used in a dirty and damp indus­trial envi­ron­ment. Inno­v­a­tive con­nec­tion tech­nol­ogy ful­fill­ing the require­ments of pro­tec­tion class IP67. Prod­ucts

Cir­cu­lar Con­nec­tors Field attach­able

Field attach­able con­nec­tors from CONEC give you the free­dom and flex­i­bil­ity to react to the cabling sit­u­a­tion on site. Prac­ti­cal, cost-effective and, above all, flex­i­ble solu­tions for quick cabling are required for both small series as well as spe­cial pur­pose machines. This pro­gram com­prises con­nec­tors and adapters – nat­u­rally with anti-vibration lock­ing – in a straight or angled con­struc­tion as well as in shielded ver­sions. You can choose between screw and clamp con­nec­tions as well as a max­i­mum cable diam­e­ter of 4 up to 12mm. Prod­ucts

Sock­ets

Var­i­ous require­ments are imposed on mod­ern device con­nec­tion tech­nol­ogy today. The main issues are progress in minia­tur­i­sa­tion in engine and machine design as well as appli­ca­tions with increased power require­ments. Safe data trans­mis­sion must always be guar­an­teed, even in harsh envi­ron­men­tal con­di­tions. For con­nec­tion on the device side, CONEC offers a broad range of unit side con­nec­tors. Fields of appli­ca­tion are, amongst oth­ers:
— dis­tri­b­u­tion cab­i­nets
— engine and speed sen­sor con­nec­tion tech­nol­ogy. Prod­ucts

Panel Plugs/Panel Female

These con­nec­tors were designed spe­cially for use with sen­sor pipe mount­ing. Depend­ing on the ver­sion, these com­po­nents come with a screw-on, snap-in or screw-on/snap-in con­nec­tion. All ver­sions are avail­able either with sol­der or board con­tacts for direct cir­cuit board con­nec­tion. The trans­par­ent ver­sions are designed with a recess for attach­ing a SMD-LED. Prod­ucts

 

 

Cir­cu­lar Con­nec­tors for spe­cial appli­ca­tions

The demands for higher and higher Degrees of tem­per­a­ture resis­tance cer­tainly don’t stop for indus­trial automa­tion. For these kinds of appli­ca­tions, CONEC now offers the high tempera-ture fam­ily, which can with­stand 8000 hours at a con­stant tem­per­a­ture of +125°C – it can also with­stand tem­po­rary peak val­ues of up to 150°C over 2000 hours. The Food & Bev­er­age indus­try has very spe­cial require­ments regard­ing chem­i­cal and tem­per­a­ture resis­tance – also for the cir­cu­lar con­nec­tor. The pro­cure­ment of stan­dard com­po­nents is often not up to this task. Mate­ri­als have been selected for the CONEC cir­cu­lar con­nec­tors of the Food&Beverage fam­ily which meet high hygienic require­ments and which are resis­tant to com­mon, harsh clean­ing agents used in high pres­sure clean­ing processes. Food&Beverage cir­cu­lar con­nec­tors from CONEC meet pro­tec­tion class IP69K. Prod­ucts


Cir­cu­lar Con­nec­tors for bus sys­tems

Bus tech­nol­ogy has advanced over the last few years in indus­trial automa­tion. The con­nec­tors required for data trans­mis­sion are very bus-specific in their design. To access the very com­plex world of bus tech­nol­ogy, CONEC offers con­nec­tors for Profibus DP, Device– Net and Indus­trial Eth­er­net 10 Gbit. Profibus is a manufacture-dependent, open field bus sys­tem for a vari­ety of appli­ca­tions in man­u­fac­tur­ing, pro­cess­ing and build­ing automa­tion. Indus­trial Eth­er­net is the gen­eral term for all appli­ca­tions that use the Eth­er­net stan­dard to net­work devices used in indus­trial automa­tion. Prod­ucts


Junc­tion sys­tems

This pro­vides a cost-effective and prac­ti­cal wiring sys­tem in the field for sen­sors and actors with a cabling sys­tem that meets pro­tec­tion class IP 67. Junc­tion sys­tems are used any­where sen­sor and actor sig­nals need to be extended quickly and easly for con­nec­tion to their super­or­di­nate con­trol sys­tems. Indi­vid­ual sig­nals are either con­nected directly to the super­or­di­nate sys­tem via a home­run cable or via a con­nec­tion inter­face. Optional LED dis­plays for sig­nal and power reduce the effort required to track down errors. Prod­ucts



Valve Con­nec­tors

Valve con­nec­tors are a com­pact and very robust con­nec­tion solu­tion for the secure trans­mis­sion of volt­ages and cur­rent for pneu­matic, hydraulic and elec­tro­mag­netic actu­a­tors. Five dif­fer­ent designs – A, B, B-Industry, C con­tact dis­tance 8 mm / 9.4 mm – are avail­able that meet EN 175301–803 specifi cations. You can choose from ver­sions with an inte­grated pro­tec­tive cir­cuit to reduce volt­age spikes and/or an LED func­tion dis­play for quick error diag­no­sis. Ver­sions are also avail­able with­out the inte­grated pro­tec­tive cir­cuit. Prod­ucts