RJ45 Cat.5e/Cat.6a Installation housing set

Metal version, nickel plated, M28 threaded connection

• For front or rear panel mounting up to wall thickness of .13”/3.2 mm
• Metal version, brass nickel plated
• Unshielded or shielded RJ45 Inline socket connector Cat.5e/Cat.6a
• Protection cap M28 threaded termination, alternative with hex 32 protective cover
• Special version with solder termination (PCB)
• Available as a set with protection cap

RJ45 Cat.5e Installation housing set

Solder termination (PCB) – M28 threaded termination

• For front or rear panel mounting up to wall thickness of .13”/3.2 mm
• Metal version
  
• Shielded RJ45 IDC Jack Cat.5e
• Protection cap M28 threaded termination
• Available as a set with protection cap

RJ45 Cat.5e/Cat.6a Plug connector set

Standard metal version – M28 threaded termination

• Shielded RJ45 plug connector Cat.5e/Cat.6a
• For use with solid or stranded, shielded or unshielded cable size AWG24
• Metal connector fastening ring, M28 thread, alternative with hex 32 coupling ring
• Housing: Metallized plastic or full metal
  

RJ45 Cat.5e/Cat.6a Plug connector set

M28 threaded termination - Plastic strain relief version

• Shielded RJ45 plug connector Cat.5e/Cat.6a
• Plastic strain relief version
• For use with solid or stranded, shielded or unshielded cable size AWG24
• Threaded connection for application inside of enclosure (IP20)
• Designs:

          - M28 Housing and socket connector black plastic 

          - M28 Housing and socket connector metallized plastic