D-SUB Metal Hood
Straight cable entry – 9-50 pos.
- Zinc die-cast hood, EMI RFI shielding
- Cable sleeve
- Fastening:
- short screws 4-40 UNC or M3 thread
- jack screws 4-40 UNC or M3 thread
- Housing nickel plated
- Bulk or single packaged units
D-SUB Metal Hood
Side cable entry – 9-50 pos.
- Zinc die-cast hood, EMI RFI shielding
- Cable sleeve
- Fastening:
- short screws 4-40 UNC or M3 thread
- Housing nickel plated
- Bulk or single packaged units
D-SUB Metal Hood
Variable cable entries – 9-50 pos. – Without jack screws
- Zinc die-cast hood, EMI RFI shielding
- Two designs:
- Type 1: 1.575" 40 mm height
- Type 2: 2.165" 55 mm height
- Delivery includes: Hood with covers, blanking plugs, screws for assembly
- Cable clamp must be ordered separately
- Crimp fitting and crimp tool please contact factory
- Bulk or single packaged units
D-SUB Metal Hood
Variable cable entries – 9-50 pos. – Jack screws
- Zinc die-cast hood, EMI RFI shielding
- Two designs:
- Type 1: 1.575“ 40 mm height
- Type 2: 2.165“ 55 mm height
- Delivery includes: Hood, blanking plugs, screws for assembly grounding screws, 4-40 UNC jack screws
- Cable clamp must be ordered separately
- Crimp fitting and crimp tool please contact factory
- Bulk or single packaged units M3 thread design for jack screws available on request
D-SUB Metal Hood
Variable cable entries – 9-50 pos. – Slide lock
- Zinc die-cast hood, EMI RFI shielding
- Design: 9 pos. = two sided cable entries, 15-50 pos. = three cable entries
- Delivery includes: Hood, blanking plugs, screws for assembly, grounding screw, slide lock, spring
- Cable clamp must be ordered separately
- Crimp fitting and crimp tool please contact factory
- Bulk or single packaged units
D-SUB Metal Hood
Variable cable entries – 9-50 pos. – Without jack screws
- Zinc die-cast hood, EMI RFI shielding
- Design: 9 pos. = two side cable entries, 15-50 pos. = three cable entries
- Internal ground
- Bulk or single packaged units
D-SUB Metal Hood
Variable cable entries – 9-25 pos. – Jack screws
- Zinc die-cast hood, EMI RFI shielding
- Designs: 9-15 pos. = one straight cable entry, 25 pos. = three cable entries
- Internal ground
- 4-40 UNC jack screw M3 thread design for jack screws available on request
- Bulk or single packaged units
- Cable clamps must be ordered separately
D-SUB Metal Hood
Side cable entry – 9-25 pos. – Jack screws
- Zinc die-cast hood, EMI RFI shielding
- Internal ground
- Fastening: jack screws 4-40 UNC or M3 thread
- Bulk or single packaged units
- Cable clamps must be ordered separately
D-SUB Metal Hood
Straight cable entry – 9-50 pos. – With jack screws
- Zinc die-cast hood, EMI RFI shielding
- Simple assembly
- Fastening:
- Short screw Thread 4-40 UNC
- Jack screw Thread 4-40 UNC
- Bulk or single packaged units
D-SUB Metal Hood
Straight cable entry – 9-37 pos. – Jack screws
- Zinc die-cast hood, EMI RFI shielding
- Plastic strain relief
- Fastening: jack screws 4-40 UNC or M3 thread
- Housing nickel plated
- Attentuation factor: > 40dB between 30 Mhz and 2 GHz
- Crimp fitting and crimp tool please contact factory
- Bulk or single packaged units
